The SOTA Silver Pulser offers the benefits of gentle microcurrents of electricity and also makes a mild silver solution. The microcurrents help stimulate the body's natural electricity for greater energy and well-being and Ionic ~ Colloidal Silver is one of natures germ fighters.

The Silver Pulser is the 1st and 2nd step of the Robert C. Beck Protocal:

1. Blood Electrification/Purification: Electrical micro-currents are known to eliminate all viruses, parasites, fungi, bacteria and pathogens in blood. The concept has been revealed in many revolutionary patents and research papers over the past 100 years (going back to 1890), but these breakthroughs were typically lost, suppressed, ridiculed by mainstream medicine, etc. The method was rediscovered by Kaali at the Einstein College of Medicine as an AIDS cure in 1990, but, as usual, it was promptly buried and all but forgotten until Bob Beck read about it and decided to research it.  Blood electrification takes 2 hours daily for about four weeks to get significant results.  The Silver Pulser is our version of Beck's blood electrification unit.

2. Colloidal Sliver: Home-made, pennies-per-gallon colloidal silver acts as a "second immune system" according to Bob Beck.  It has been shown in numerous studies to be the only substance known to eliminate hundreds of viruses, bacteria, fungus, etc., more than any modern antibiotic or "miracle drug" yet developed by the pharmaceutical companies.  It greatly assists in eliminating pathogens and guards against opportunistic infections.  It can be used anywhere in or on the body.  You can buy the blood electrification and a colloidal silver maker in one unit with the Silver Pulser.

There is extensive research on silver's ability to disarm or kill germs. Silver is used in water filters, air purifiers on airplanes, burn medications, etc. We've noticed that after either blood electrification or drinking ionic/colloidal silver for a period of time our blood improves--often dramatically. This can best be seen using live-blood analysis with a high-powered, darkfield microscope. We drink ionic/colloidal silver on a regular basis but take breaks as we do with any product. With the number of beasties we are exposed to in today's world, we use the blood electrification attachment daily for at least four weeks about every six months or so.

The Silver Pulser is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.

The Silver Pulser uses only the highest quality .9999 Pure Fine Silver Electrodes.

The Silver Pulser generates the finest quality Ionic Colloidal Silver at a rate of 5-8 ppm (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The SP5 Model has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production

• The Bio-Electric Protocol has changed. SOTA boosted the output voltage from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.

• A unique circuit design allows The Silver Pulser to operate from a single 9 Volt alkaline battery. Original plans actually called for the use of 7 batteries in the design. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Pulser.

• Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.

• We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.
   
• Constant-Current Output - SP5 Model has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.
   

• Output monitoring circuit and indicator.

• The Bio-Stimulator Probes are of the highest quality.

• Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.

• All electrical wire connections made with Food Grade solders and fluxes for the highest in safety and purity.

• 3 Year Parts and Labour Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and Probes are available.

The Unit:

The Silver Pulser is housed in an attractive new custom plastic enclosure with a built-in compartment for the 9 Volt battery. A slide-off lid allows you to change the battery easily. A Thumbwheel Switch Control Knob turns The Silver Pulser on and off and varies the intensity of the "Bio-Stimulator Probe" output.

A Green LED Light comes on when the Silver Pulser is turned on.

A flashing Yellow LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.

An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver Wires is correct and the circuit is complete.

A Red LED Light indicates low battery.

The Silver Pulser has one 6 pin DIN style jack for plugging in the Fine Silver Wires and for the Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries. NOTE: You cannot power the unit with a Wall Adaptor at the same time as using the Bio-Stimulator output. This is a government regulatory stipulation. However, a Wall Adaptor can be used for Silver production only.

We include Cotton Sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)

The Silver Pulser is packaged in a custom soft carrying case for easy storage.

Electronics:

The Silver Pulser is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.

Specifications:

• Battery Voltage: 9 Volts DC (Alkaline Battery)
• Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adapter, Automobile Battery, or Solar Panel.
• Output Voltage at Colloidal Silver Wires: 31 Volts DC, (+/- 1 Volt) Constant-Voltage Output
• Output Current at Colloidal Silver Wires: 1.5 milliamps (+/- 0.5ma) Constant-Current Output
• Ionic-Colloid Silver Production: 5 - 8ppm (parts per million) for 2 hours for 16 ounces distilled water.
• Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
• Ionic-Colloid Silver Colour: Clear or Pale Gold.
• Silver Wire Life: Can make many gallons ionic/colloidal silver per set of Fine Silver Wires, when made as directed.
• Output Voltage at Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz.
• Output Current at Stimulator Probes: ~12 milliamps maximum when probes shorted and Control Knob on full intensity. 

The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (20 cm) and are constructed of only Pure Fine (.9999 pure) Silver Wire.

Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long).
Weight of The Silver Pulser unit is only a few ounces - very lightweight.

Each Silver Pulser comes complete with:

The Silver Pulser unit